| |
DESIGN A CHILLER:
With over 300 designs to start from
and experience to design from scratch if necessary --
you've found the right place to get the job done right!
 Having
compressors available from three major manufactures allows
us the flexibility to develop a chiller for an:
- indoor, air-cooled or water-cooled condenser
- outdoor, air-cooled condenser
- low, medium, or high temp compressor
Our
chillers range from 1kW on the small portable size, to 25
tons (300,000
Btu/Hr) on the large outdoor skid-mounted
units.
With
over 50 different pumps to choose from, we can meet
your flow and pressure needs:
- centrifugal, turbine, gear, or vane, multi-stage, mag-drive,
and canned-motor pumps.
- 1 to 100 gpm, 5 to 200 psi
The
widest selection of Heat Transfer Fluids (HTF)
allows us to work with what is right for you:
- Fluorinert
- Galden, H-Galden
- PAO
- Silicone Oil, Syltherm HF, XLT
- Propylene Glycol, Ethylene Glycol
- Methanol
- Paratherm
- D-Limonene
- Dynalene
- Deuterium Oxide
- BHP
- Water
Each of these factors could drastically
affect the design of the chiller that would best serve your
needs. Each of the factors could drastically affect the price
as well.
IN THE
BEGINNING...
Now, designing your Mydax chiller is really not that difficult (shhhh). It's as easy as 1,2,3...
- Simply go to our "RFQ"
Request For Quotation page. Fill out your
contact information and as many of your application's
requirements as possible.
- Usually within a day, we will review your requirements
and select one of our models that most closely meets your
needs. If necessary, we'll propose any modifications.
- Within days, you'll have a solution: product, availability,
and price.
Leave it to the experts. You really didn't want to design
your own chiller anyway! You have other stuff you should
be doing [playing].
|
CALL or EMAIL
for
Design Assistance!
530-888-6662
Auburn, CA
sales@mydax.com
|
