|
| |

MYDAX OUTDOOR CHILLER / COOLER / HEATER PRODUCTS:
Outdoor chillers are rated for ambient conditions from -20°F
up to as high as +120°F. They can be air-cooled or water cooled designs.
These units may actually serve as "tap water replacement" chillers.
However, most demanding applications use a specialty heat
transfer fluid (HTF) that spans a wide temperature range
and is not susceptible to freezing in the winter weather.
Mydax Outdoor chillers are most often
recommended when one or more of the following are required:
|
|
Precision temperature stability |
|
|
|
Multi Channel Systems for smaller footprint and economical solution for multiple cooling loop applications! |
|
Harsh operating environments |
|
High reliability, 24/7/365 Operation |
|
Both heating and cooling over a wide temperature range |
This product is available in the following
configurations:
|
|
- Multi-Loop: 1, 2, 3 or more independent channels
|
|
|
Special Heat Transfer Fluid (HTF) could
be:
|
|
|
|
|
|
|
|
|
|
- Water / Ethylene or Propylene Glycol mixture
|
|
|
|
| |
|
|
| |
In the Chart below, click on any of the models to see
a summary of the specifications. From there, you'll be
able to download the corresponding PDF datasheet
to a new window.
Please Note: These are example systems that can be customized to meet your specific needs.
|
|
| |
|
|
| |
|
|
| |
OUTDOOR
SERIES - PRODUCT SUMMARY:
1VLH10W-OD Specs
:
|
|
|
Temperature Range |
-70°C to +60°C |
Number of Channels |
1 |
Cooling Capacity |
375 W at -70°C, 3 KW at -50°C
|
Heating Capacity |
3 KW
|
Temperature Stability |
± 0.5°C or better |
Fluid (HTF) |
Syltherm HF or Galden ZT-100 |
Reservoir Volume |
5 Gallons |
Pump: Flow at Pressure |
4 GPM at 30 PSI |
Input Power |
208/230VAC, 60Hz, 3ph, 40 Amp |
Configuration |
Outdoor, Water-cooled |
|
|
|
|
1M23AW-OD Specs :
|
|
|
Temperature Range |
+10°C to +40°C |
Number of Channels |
1 |
Cooling Capacity |
6.5 KW at +15°C
|
Heating Capacity |
-
|
Temperature Stability |
± 0.25°C or better |
Fluid (HTF) |
80/20 Propylene Glycol/Water |
Reservoir Volume |
25 Gallons |
Pump: Flow at Pressure |
25 GPM at 50 PSI |
Input Power |
208/230VAC, 60Hz, 3ph, 40 Amp |
Configuration |
Outdoor, Air-cooled or Water Cooled |
|
|
|
|
3LM30A-OD Specs
:
|
|
|
Temperature Range |
-15°C to +50°C |
Number of Channels |
3 |
Cooling Capacity |
9 KW Total, 3 KW each loop at -15°C
|
Heating Capacity |
3 KW each loop
|
Temperature Stability |
± 0.5°C or better |
Fluid (HTF) |
PAO Royco 602, MIL-PRF-87252 |
Reservoir Volume |
5 Gallons each loop |
Pump: Flow at Pressure |
4 GPM at 40 PSI |
Input Power |
440/480VAC, 60Hz, 3ph, 60 Amp |
Configuration |
Outdoor, Air-cooled |
|
|
|
|
1M30A-OD Specs : |
|
|
Temperature Range |
+4.5°C to +21°C |
Number of Channels |
1 |
Cooling Capacity |
8.8 KW at +16 °C |
Heating Capacity |
- |
Temperature Stability |
± 0.5°C or better |
Fluid (HTF) |
50/50 Propylene Glycol/Water |
Reservoir Volume |
20 Gallons |
Pump: Flow at Pressure |
4 GPM at 40 PSI |
Input Power |
208/230VAC, 60Hz, 3ph, 30 Amp |
Configuration |
Outdoor, Air-cooled |
|
|
|
|
1VL40W-OD Specs
:
|
|
|
Temperature Range |
-50°C to +35°C |
Number of Channels |
1 |
Cooling Capacity |
12.9 KW at -45°C
|
Heating Capacity |
3 KW
|
Temperature Stability |
± 0.5°C or better |
Fluid (HTF) |
Syltherm HF |
Reservoir Volume |
100 Gallons |
Pump: Flow at Pressure |
25 GPM at 20 PSI |
Input Power |
208/230VAC, 60Hz, 3ph, 100 Amp |
Configuration |
Outdoor, Water-cooled |
|
Parallel Compressor System |
|
|
1LH75A-OD Specs : |
|
|
Temperature Range |
-30°C to +150°C |
Number of Channels |
1 |
Cooling Capacity |
22 KW at -20°C |
Heating Capacity |
18 KW |
Temperature Stability |
± 1.0 °C or better |
Fluid (HTF) |
Syltherm HF |
Reservoir Volume |
30 Gallons |
Pump: Flow at Pressure |
15 GPM at 30 PSI |
Input Power |
440/480VAC, 60Hz, 3ph, 80 Amp |
Configuration |
Outdoor, Air-cooled |
|
|
|
|
3M82WA-OD Specs
:
|
|
|
Temperature Range |
0°C to +40°C |
Number of Channels |
3 |
Cooling Capacity |
24 KW Total, 8 KW each loop at +20°C
|
Heating Capacity |
3 KW each loop
|
Temperature Stability |
± 0.5°C or better |
Fluid (HTF) |
PAO Royco 602, MIL-PRF-87252 |
Reservoir Volume |
10 Gallons each loop |
Pump: Flow at Pressure |
6 GPM at 140 PSI |
Input Power |
440/480V, 60Hz, 3ph, 70 Amp |
Configuration |
Outdoor, Water-cooled |
|
|
|
|
|
|
| |

Advanced Temperature Control Technology

|
home |
support |
applications |
products |
sales|
contact
|
|
|