|
| |
WATER-COOLED PRODUCTS:
A Water-Cooled chiller is generally the least expensive
option, while being space saving and efficient when a source
of water is available for cooling the condenser. These are
designed
as
indoor units;
heat rejected by the refrigeration system goes to the building
chiller
or facilities water.
Additional wide-temperature (-70°C to +150°C) water-cooled
chillers are shown separately under the: VLH
Wide-Temp menu.
Mydax Water-Cooled chillers are most
often recommended when one or more of the following
are required:
|
|
|
precision temperature stability
|
|
|
special custom controls
|
|
|
special fluid handling (materials,
pumps, filtration)
|
|
high reliability |
|
both heating and cooling |
This product is available in the following
configurations:
|
| |
- Multi-Loop: 1, 2, and 3 independent channels
|
| |
|
Special Heat Transfer Fluid (HTF) could
be:
|
| |
|
| |
- Fluorinert and Novec fluids by 3M
|
| |
- Syltherm HF, XLT by DOW Chemical
|
| |
- Deionized Water, specify conductivity|resistivity
|
| |
|
| |
|
|
|
| |
|
|
| |
In the Chart below, click on any of the models to see
a summary of the specifications. From there, you'll be
able to download the corresponding PDF datasheet
to a new window (approx. 1Mb in size, each).
|
|
| |
|
|
| |
|
|
| |
WATER-COOLED
SERIES - PRODUCT SUMMARY:
1M12WB
Specs :
|
|
|
| Temperature Range |
+13°C to +40°C
|
| Number of Channels |
1 |
| Cooling Capacity |
3,500 Watts (12,000 Btu/Hr) @ +13°C
fluid
|
| Heating Capacity |
-
|
| Fluid (HTF) |
Deuterium Oxide (D2O) |
| Reservoir Volume |
1 Gallon |
| Pump: Flow at Pressure |
1.5 GPM at 120 PSI |
| Input Power |
208-240V, 60Hz, 30 Amp, 3 phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
1M13W Specs :
|
[PDF
Datasheet] |
|
| Temperature Range |
+8°C to +40°C
|
| Number of Channels |
1 |
| Cooling Capacity |
3,800 Watts (13,000 Btu/Hr) @ +8°C
fluid
|
| Heating Capacity |
1,000 Watts
|
| Fluid (HTF) |
Deionized Water (250K-2M Ohms) |
| Reservoir Volume |
7 Gallons |
| Pump: Flow at Pressure |
5 GPM at 90 PSI |
| Input Power |
208-240V, 60Hz, 20 Amp, 3-phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
2M30W Specs
:
|
[PDF
Datasheet] |
|
| Temperature Range |
+10°C to +60°C
|
| Number of Channels |
2 |
| Cooling Capacity, each |
4,400 Watts (15,000 Btu/Hr)
@ +10°C
fluid
|
| Heating Capacity, each |
4,500 Watts
|
| Fluid (HTF) |
50/50 Ethylene Glycol/Water or DI water |
| Reservoir Volume, each |
9 Gallons |
| Pump: Flow at Pressure |
15 GPM at 60 PSI and 5 GPM at 110 PSI |
| Input Power |
208-240V, 60Hz, 25 Amp, 3 phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
1M56W Specs
:
|
[PDF
Datasheet] |
|
| Temperature Range |
+8°C to +40°C
|
| Number of Channels |
1 |
| Cooling Capacity |
16,400 Watts (56,000 Btu/Hr) @ +8°C
fluid
|
| Heating Capacity |
3,000 Watts
|
| Fluid (HTF) |
Deionized Water, 300K Ohm |
| Reservoir Volume |
44 Gallons |
| Pump: Flow at Pressure |
25 GPM at 60 PSI |
| Input Power |
440-480V, 60Hz, 30 Amp, 3 phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
1M150W Specs
:
|
[PDF
Datasheet] |
|
| Temperature Range |
+8°C to +40°C
|
| Number of Channels |
1 |
| Cooling Capacity |
44,000 Watts (150,000 Btu/Hr) @
+20°C fluid
|
| Heating Capacity |
3,000 Watts
|
| Fluid (HTF) |
Deionized Water, 300K Ohm |
| Reservoir Volume |
44 Gallons |
| Pump: Flow at Pressure |
40 GPM at 50 PSI |
| Input Power |
440-480V, 60Hz, 40 Amp, 3 phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
1FT20W Specs
:
|
[PDF
Datasheet] |
|
| FLOW-THROUGH CHILLER |
|
| Temperature Range |
15°C to +25°C
|
| Number of Channels |
1 |
| Cooling Capacity |
5,856 Watts (20,000 Btu/Hr) @ 7°C
deltaT
|
| Fluid 1 (Recirculating) |
Water
|
| Fluid 2 (HTF) |
Deionized Water, 1M Ohm |
| Reservoir Volume, each |
20 Gallons |
| Pump: Flow at Pressure |
up to 3 GPM; max pressure drop 2 PSI |
| Input Power |
208-240V, 60Hz, 20 Amp, single-phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
1L6W Specs
:
|
[PDF
Datasheet] |
|
| Temperature Range |
-25°C to +20°C
|
| Number of Channels |
1 |
| Cooling Capacity |
1,760 Watts (6,000 Btu/Hr) @ -20°C
fluid
|
| Heating Capacity |
-
|
| Fluid (HTF) |
Methanol |
| Reservoir Volume |
5 Gallons |
| Pump: Flow at Pressure |
5 GPM at 30 PSI |
| Input Power |
208-240V, 60Hz, 30 Amp, 3 phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
2LH8W Specs : |
[PDF
Datasheet] |
|
| Temperature Range |
-25°C to +80°C
|
| Number of Channels |
2 |
| Cooling Capacity, each |
1,170 Watts (4,000 Btu/Hr) @ -25°C
fluid
|
| Heating Capacity, each |
1,500 Watts
|
| Fluid (HTF) |
Galden HT-100 |
or |
50/50 Ethylene Glycol/Water |
| Reservoir Volume, each |
9 Gallons |
| Pump: Flow at Pressure |
10 GPM at 60 PSI |
| Input Power |
208-240V, 60Hz, 50 Amp, 3 phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
1H10W Specs
:
|
[PDF
Datasheet] |
|
| Temperature Range |
+25°C to +150°C
|
| Number of Channels |
1 |
| Cooling Capacity |
2,900 Watts (10,000 Btu/Hr) @ +25°C
fluid
|
| Heating Capacity |
3,000 Watts
|
| Fluid (HTF) |
Turbine Oil, Mineral Oil, SAE 5W Castrol
Oil |
| Reservoir Volume |
10 Gallons |
| Pump: Flow at Pressure |
6 GPM at 50 PSI |
| Input Power |
208-240V, 60Hz, 30 Amp, 3 phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
1LH24W Specs
:
|
[PDF
Datasheet] |
|
| Temperature Range |
-10°C to +70°C
|
| Number of Channels |
1 |
| Cooling Capacity |
7,000 Watts (24,000 Btu/Hr) @ -10°C
fluid
|
| Heating Capacity |
2,500 Watts
|
| Fluid (HTF) |
Ethylene Glycol/Water or Fluorinert FC-77 |
| Reservoir Volume |
5 Gallons |
| Pump: Flow at Pressure |
9 GPM at 50 PSI or 15 GPM at 50 PSI |
| Input Power |
208-240V, 60Hz, 40 Amp, 3 phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
1H52W Specs : |
[PDF
Datasheet] |
|
| Temperature Range |
+20°C to +90°C
|
| Number of Channels |
1 |
| Cooling Capacity |
15,250 Watts (52,000 Btu/Hr) @ +20°C
fluid
|
| Heating Capacity |
15,000 Watts
|
| Fluid (HTF) |
50/50 Ethylene Glycol/Water |
| Reservoir Volume |
11 Gallons |
| Pump: Flow at Pressure |
10 GPM at 50 PSI |
| Input Power |
208-240V, 60Hz, 70 Amp, 3 phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
1H100W Specs : |
[PDF
Datasheet] |
|
| Temperature Range |
+25°C to +150°C
|
| Number of Channels |
1 |
| Cooling Capacity |
29,000 Watts (100,000 Btu/Hr) @ +25°C
fluid
|
| Heating Capacity |
3,000 Watts
|
| Fluid (HTF) |
Turbine Oil, Mineral Oil, SAE 5W Castrol
Oil |
| Reservoir Volume |
10 Gallons |
| Pump: Flow at Pressure |
6 GPM at 50 PSI |
| Input Power |
208-240V, 60Hz, 50 Amp, 3 phase |
| Configuration |
Indoor, Water-cooled |
| |
|
| |
|
|
|
| |
Advanced Temperature Control Technology
|
home |
support |
applications |
products |
sales|
contact
|
|
|
